Please put all your known Elan Cross-Refenced parts here--click "start new topic" and title it with the part type, then add all known info to the post.
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by Oliver » Sun 20.03.2005, 22:32
Possibly a bit trivial but the current Honda Civic diesel (1.7 CTDi) has an Isuzu based engine & i have found that the sump plug and washer appear identical to that fitted to the Elan.
M100 N/A - No PAS
RenautSport Megane 275 Cup
MGF
Benelli 2C
-

Oliver
- Fanatic
-
- Posts: 414
- Joined: Tue 15.03.2005, 21:49
- Location: Maidstone, Kent
-
by ailwyn » Fri 06.01.2006, 23:18
Is the sump plug washer a dealer part or are there any additional substitutes as I cant seem to get a washer for the Elan or the Civic CTDi from local suppliers?
Thanks
Ailwyn
-
ailwyn
- Forum Member
-
- Posts: 3361
- Joined: Tue 09.08.2005, 20:45
by Dico » Fri 06.01.2006, 23:32
Monty got me a couple, from SJ's i believe.
Although i would be suprised if they can't be matched up.
4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
-

Dico
- Fool Boy Four - Founder
-
- Posts: 3569
- Joined: Mon 01.12.2003, 09:45
- Location: Moderator Manchester
by John_W » Sun 08.01.2006, 16:22
Halfords HSP605 "Sump Nut and Washer Kit" fits. I've just changed my oil and tried the bolt for fit of the thread. 22mm spanner for the bolt head, same as original.
The copper washers seem to vary. The one I have on the car is fairly broad (ie the width of the metal between the inner hole and outer edge) whereas the spare I got from SJ is fairly narrow; the Halfrauds HSP605 has a washer which is in between the other two. I suppose that so long as it's copper and the hole diameter is OK you're laughing.
John
-

John_W
- Heid-bummer
-
- Posts: 3780
- Joined: Mon 21.04.2003, 12:31
- Location: Aberdeen
-
by Oliver » Thu 19.01.2006, 20:34
I`ll get the Honda part numbers from work tomorrow.
-

Oliver
- Fanatic
-
- Posts: 414
- Joined: Tue 15.03.2005, 21:49
- Location: Maidstone, Kent
-
by Oliver » Mon 23.01.2006, 20:52
Honda part nos:
sump plug 90013-PLZ-D00
washer 90413-PLZ-D00
-

Oliver
- Fanatic
-
- Posts: 414
- Joined: Tue 15.03.2005, 21:49
- Location: Maidstone, Kent
-
by Coupeboy » Thu 10.09.2009, 22:15
Lotus part number is A100E6159S 'Washer-Sump Drain Plug' which is 14mm x 20mm x 1.5mm (I/D x O/D x thickness).
It should be possible to match this size in a hardware store or available from CPC in a bag of 50 for approximately £6 that’s 12p each. Cheaper than Halfords at £1.22 or Paul Matty at £1.48 each! Mind you that’s 250 000 miles of oil changes!
1992 Elan Pacific Blue SE
2007 325se Coupe
-

Coupeboy
- Enthusiast
-
- Posts: 154
- Joined: Thu 21.02.2008, 13:55
- Location: Garstang, Lancashire, UK
by GeoffSmith » Thu 10.09.2009, 23:06
Some of this info added to the
Wiki.
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-

GeoffSmith
- Kitty Fiddler
-
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
-
Return to Part Cross-Reference
Who is online
Users browsing this forum: No registered users and 0 guests