Replacement Radiator

Alternator, waterpump, A/C, sensors, CAS, etc.

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Replacement Radiator

Postby Gareth » Tue 22.05.2012, 08:02

Any advice on best type/source for a new radiator?

E bay list a few ranging from £150 (Copper/Brass) to £360 (Aluminium)

Has anyone bought one of the ones off e bay?

Any help/info/advice appreciated

:)
Gareth
Gareth
Enthusiast
 
Posts: 105
Joined: Mon 07.01.2008, 20:32
Location: Pontypridd S Wales

Re: Replacement Radiator

Postby Rice crispy » Tue 22.05.2012, 08:36

HI have a look here viewtopic.php?f=29&t=5761&start=80 about half way down shows where Dapinky got his, I also think guys have had both types you mention.

David and Mini Me
User avatar
Rice crispy
God
 
Posts: 1871
Joined: Tue 16.06.2009, 11:48
Location: brentwood essex

Re: Replacement Radiator

Postby Fetnas » Wed 23.05.2012, 12:29

I've fitted an aluminium rad purchased from Ebay due to a leaking end tank that was shipped to Aus for the UK. It was a direct fit and was well made. Sould give me many years of cool running. The seller's name was Bostonradiators.

The annoying thing is it was going to cost me more and take longer to get one fabricated locally so the ebay option was teh way to go.

I hope this helps.
Knowledge is realizing that the street is one-way, wisdom is looking both directions anyway
User avatar
Fetnas
Enthusiast
 
Posts: 207
Joined: Wed 04.02.2009, 18:33
Location: Melbourne Australia, and the elan is here too!

Re: Replacement Radiator

Postby abmunro » Wed 23.05.2012, 19:20

I have an origonal for £50 + P&P

Its off my car I replaced mine with aluminium one from Boston Radiators..
91 Elan SE 24k miles, 270 BHP @ 1.25 barg. Roll hoops + fairings+ speed humps Elise lights. S2 alloys. Nitrons& Eibachs,AP's front & Hi Spec rear brakes
User avatar
abmunro
God
 
Posts: 1726
Joined: Wed 18.04.2007, 22:46
Location: Chester-Le-Street, Co Durham.

Re: Replacement Radiator

Postby cliff » Wed 23.05.2012, 23:31

My new aluminium one from Boston Rads arrived today. Looks very nice.

If you speak to them they will give you a LEC discount.
91 Lotus Elan SE Turbo
03 MG TF 135 Sprint (Partner's)
07 Alfa Spider 939

If you can't be a good example, then you might as well be a terrible warning
User avatar
cliff
God
 
Posts: 801
Joined: Mon 17.01.2011, 18:39
Location: Preveza Greece / Scunthorpe UK

Re: Replacement Radiator

Postby Gareth » Thu 24.05.2012, 06:28

Thanks for all the replies/help & the offer of a replacement rad.

After speaking to them, however, I've decided to go for the Aluminium replacement from Boston Rads.

I'll post comments when it arrives

Thanks :cheers:
Gareth
Gareth
Enthusiast
 
Posts: 105
Joined: Mon 07.01.2008, 20:32
Location: Pontypridd S Wales

Re: Replacement Radiator

Postby Don.Hasi » Sat 14.07.2012, 14:25

After another experience with the unkind Boston rads I have decided for the copper one from eBay. Very kind chap, custom built and just in time :)

Bad point of the story: the 3 row Ali one has had 3,6 kg dry and the copper one now 6,7 kg :shock: not the Lotus way, but it was urgent and I never throw cash again into a unkind mouth.
ImageImageImage
User avatar
Don.Hasi
Fanatic
 
Posts: 530
Joined: Tue 09.08.2005, 22:30
Location: Germany, Südpfalz/Elsass

Re: Replacement Radiator

Postby epipete » Sat 14.07.2012, 14:39

Don.Hasi wrote:After another experience with the unkind Boston rads I have decided for the copper one from eBay.


Without going in to gory details, which may be libelous & out of spirit with forum policy, what was the issue that you had with Boston Rads?

I only ask because I'm up for a replacement & because others here speak highly of them, they were my planned source!

Pete
You know more than you think you know, just as you know less than you want to know. ... Oscar Wilde
User avatar
epipete
God
 
Posts: 2415
Joined: Wed 17.08.2011, 11:03
Location: Chippenham

Re: Replacement Radiator

Postby Don.Hasi » Mon 16.07.2012, 22:36

As usual: You ask in normal question in a very kind manner and get first 2-4 words as an answer. The answer is so short, that your question is not complete answered. You detail your question and get: NOTHING.

Thats it. And now you can imagine what you get, when there will be a mistake in this kind of craftmanship -which can normally occur, nobody is perfect and every business has his own difficulties. But what do you think will you get, when there will happen sth? Right...


There is a quote for business:
If you can´t smile... don´t progress your business
I would guess at Boston Radiators they only smile in the cellar. Hopeless...
ImageImageImage
User avatar
Don.Hasi
Fanatic
 
Posts: 530
Joined: Tue 09.08.2005, 22:30
Location: Germany, Südpfalz/Elsass

Re: Replacement Radiator

Postby Monty » Tue 17.07.2012, 23:59

It was me who setup the Discount with Boston Rads viewtopic.php?f=3&t=17346

had mine on for over 2 years with no problems.
Image
User avatar
Monty
Chunder King!
 
Posts: 7977
Joined: Sun 11.01.2004, 22:32
Location: Leeds

Re: Replacement Radiator

Postby Steve A » Wed 18.07.2012, 08:34

:agree:
"If everything is under control, you are going too slow."
User avatar
Steve A
God
 
Posts: 2659
Joined: Tue 18.09.2007, 12:44
Location: South East Essex


Return to Engine Ancillaries

Who is online

Users browsing this forum: No registered users and 2 guests