| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
Tickover
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
5 posts
• Page 1 of 1
Re: Tickover
by rip » Wed 18.07.2018, 17:46
A large recessed slothead screw in the top of the plenum. It is usually covered by a rubber plug...unless like me you've lost it 
1990 SE
-
rip - God
- Posts: 5904
- Joined: Sun 08.04.2007, 07:48
- Location: Milton Keynes, UK
Re: Tickover
by Simon_P » Wed 18.07.2018, 18:51
And any vacuum leaks that you have.
Also the throttle stop if someone has been fiddling with it.
I think there are some instructions with pictures and an explanation under "tickover" in the wiki.
Also the throttle stop if someone has been fiddling with it.
I think there are some instructions with pictures and an explanation under "tickover" in the wiki.
- Simon_P
- God
- Posts: 2602
- Joined: Fri 06.08.2004, 12:33
- Location: Kent UK
Re: Tickover
by Rambo » Wed 18.07.2018, 19:48
Before checking tickover in service mode, pull a vacuum pipe whilst idling. The revs should rise (approx. 50 - 100 rpm). If they stay the same you already have a leak in the vacuum line.
Tickover speed is usually 950 rpm
Tickover speed is usually 950 rpm
-
Rambo - Don't push me
- Posts: 9144
- Joined: Wed 24.12.2003, 00:37
- Location: Both sides of the Tweed
Re: Tickover
by mikey » Wed 25.07.2018, 20:22
Thanks everybody for your help it is much appreciated
Mike
Mike
- mikey
- Newbie
- Posts: 7
- Joined: Sat 15.07.2006, 18:15
- Location: Wakes Colne, Colchester, Essex
5 posts
• Page 1 of 1
Return to Ignition and fuelling
Who is online
Users browsing this forum: KenS and 4 guests