Rear ARB Ball Joint Gaiter/Boot

[Simon_P]

MoT next week and I've noticed that a mouse has nibbled a hole in the rear anti roll bar gaiter. It looks like the gaiter has a skirt onto the body of the joint which my standard replacement ball joint gaiter doesn't have. Anyone have or know of a suitable replacement?

[Simon_P]

Or even the key dimensions so that I can order something that may fit

[Simon_P]

Large diameter inner 30mm
Small diameter inner 16mm
Height 25mm ish

[Fredjohn]

Simon
Do you mean this part:
https://www.sjsportscars.com/parts-and- ... D6024F.htm

Not available separately.
EDIT CORRECTED LINK

[Simon_P]

FredJohn,
I meant the rubber gaiter for this:
https://www.sjsportscars.com/parts-and- ... D6024F.htm
ie I need the bit that costs £4 not £40.

Edit - the first time I clicked on your link I got a list of part numbers with no description that said R/B or NLA - thought you were pulling my leg!

[Fredjohn]

Simon
Corrected link.
Looking at original parts catalogue, the rubber bush does not appear to be available separately.

Hence your question I guess!!

[RonR]

The ones I have on the shelf (from SJs) are 30mm lower dia x 14mm upper dia x 23mm high.

[tigerdog]

A little quick searching came up withthis Ebay seller. They list 13x31x23mm here.

[Simon_P]

Thanks for the replies. I had a normal one of the correct dimensions (like the one in Tigerdog's link) and I have put that on as a temporary measure. It needs to have the wider part of the bellows higher up hence the "skirt" on the original.

I'm looking for a more suitable replacement and will post when I find one.