Wipers not working

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Wipers not working

Postby westonben » Mon 22.08.2005, 09:36

Caught in a downpour at 80 mph + this morning and the wipers stopped working.

Stopped and pushed them to the down position, but still not working. Can hear the motors whirring.

Still pissing it down when I got to work so no chance to look at them yet, does it just sound like the wipers have worked loose?

Hopefully the weather will improve and I can take a look at home tonight instead of finding a garage..............
User avatar
westonben
Fanatic
 
Posts: 429
Joined: Tue 22.04.2003, 10:09

Postby M100 TWO » Mon 22.08.2005, 17:35

it sounds like the nuts have worked loose lift the plastic covers on the end of the wiper nuts are 13 mm set them in the parked position
User avatar
M100 TWO
God
 
Posts: 926
Joined: Thu 02.10.2003, 14:49
Location: southampton

Postby Monty » Mon 22.08.2005, 19:07

unusual to have both work lose, if it isn`t that maybe a link from the motor has come off :?
User avatar
Monty
Chunder King!
 
Posts: 7977
Joined: Sun 11.01.2004, 22:32
Location: Leeds

Postby westonben » Tue 23.08.2005, 09:00

Monty takes the prize!

Unfortunately I'm working away from home so I've not got any tools at present. I need to get to halfrauds at lunchtime and have a go!
User avatar
westonben
Fanatic
 
Posts: 429
Joined: Tue 22.04.2003, 10:09

Postby Paul.P » Tue 23.08.2005, 10:41

Try & find out why the link has come off, must be a reason if its been on there for 15yrs or so, to save it happening again !
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
Paul.P
God
 
Posts: 4970
Joined: Sun 14.12.2003, 18:18
Location: Oakham, Rutland

Postby John_W » Tue 23.08.2005, 11:35

Ben,
Sorry to hear of the problem; remember the toolbox in the boot.
John
User avatar
John_W
Heid-bummer
 
Posts: 3780
Joined: Mon 21.04.2003, 12:31
Location: Aberdeen

Postby westonben » Tue 23.08.2005, 23:10

Found a Halfrauds on yell.com

Turned up at lunchtime to find it's one of those AA service centres - tightened the bolt up for free! Result.

Difficult to imagine how it comes loose other than over time or not fully tightened in the first place.

It's not such a big issue as most of the rain flies off the screen anyway. Maybe need to use RainX.

Tried the toolbox in the boot, but theirs only one spanner and it's tiny. I think the toolbox is just for show.
User avatar
westonben
Fanatic
 
Posts: 429
Joined: Tue 22.04.2003, 10:09


Return to Doors and Windows

Who is online

Users browsing this forum: No registered users and 0 guests