Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by matt_elan » Sun 25.09.2005, 10:48
i call upon ur help again people!! I have a mbc on my car, set at .75 bar (by the boost guage). however i keep losin boost. some times I put me foot down and i can feel it hold back and it only reads about .6 bar on the guage

! im so frustrated with it

. I can have a play about sometimes, take pipes off and refit, and then it may b perfect! for a week mayb! so may b its jus luck and coincidence that it starts workin? ive checked all the pipes time and time again! i do have my suspicions about the mbc. in all honesty i want 2 lose it and fit an everest chip from alan, but i want 2 get this prob sorted 1st! so any of u elan pros got any ideas 4 me???
regards
matt
-
matt_elan
- Tinkerer
-
- Posts: 80
- Joined: Sat 26.03.2005, 22:23
by Monty » Sun 25.09.2005, 11:31
Think with an MBC u have to disconect the BSV back of the airbox

-

Monty
- Chunder King!
-
- Posts: 7977
- Joined: Sun 11.01.2004, 22:32
- Location: Leeds
by stevo » Sun 25.09.2005, 14:21
sounds like a sticky wastegate. there are write ups on here on how to fix it.
arancio baby! thats italian for orange! i think?
-

stevo
- God
-
- Posts: 1897
- Joined: Mon 21.04.2003, 17:16
- Location: Aboyne, royal deeside, scotland
-
by matt_elan » Mon 26.09.2005, 07:30
right then i ll check the wastegate 2 day, cud it b a faulty actuator??
-
matt_elan
- Tinkerer
-
- Posts: 80
- Joined: Sat 26.03.2005, 22:23
by Enright » Mon 26.09.2005, 20:31
No, not faulty, just sticky. They can be freed-up pretty easily with mole-grips, and if I remember rightly, Stevo himself did a good write-up on how to do it. Just do a search for all of his posts and I bet you'll find it.
Striking fear into the hearts of duplicate posts everywhere...!
BCingU,
Neil

-

Enright
- Modificator
-
- Posts: 4860
- Joined: Sun 19.12.2004, 19:21
- Location: Arnold, Nottingham, England
by matt_elan » Tue 27.09.2005, 16:50
well ive checked the wastegate and it moves freely

I wanted it 2 be stuck!!!

now im bak 2 square 1! what else cud be causing this drop in boost? cud my turbo be dead? it doesnt smoke or anythin? and it works fine apart from this prob!!
-
matt_elan
- Tinkerer
-
- Posts: 80
- Joined: Sat 26.03.2005, 22:23
by stevo » Tue 27.09.2005, 20:24
i agree, put it back to stock and see how she runs. then buy one of alans chips, i seriously recommend them.

arancio baby! thats italian for orange! i think?
-

stevo
- God
-
- Posts: 1897
- Joined: Mon 21.04.2003, 17:16
- Location: Aboyne, royal deeside, scotland
-
Return to Turbos, Boost, and Intakes
Who is online
Users browsing this forum: No registered users and 4 guests